Clean old or dirty grout, then seal and protect it.
For more help, check our selector chart, guide to tile types and product FAQ to help select the best products for your tiles.
This is the right kit for you if any of the below apply:
- You have ceramic wall or floor tiles with discoloured or dirty grout.
- Your tiles were laid some time ago and the grout was not sealed.
NOTE: This kit is NOT suitable for use on surfaces that will be harmed by acids such as cement, limestone, marble, granite, porcelain, metals, enameled baths and basins, shower doors, taps and drains etc.
If in doubt, please ask - use our help form.
What you need to do:
- Apply Grout Joint Cleaner to the grout line. A special applicator nozzle is included. Unless the grout is extemely dirty, there is no need to scrub.
- Leave for 15 minutes. Wipe off and rinse.
- Seal the grout with Grout Seal (an applicator nozzle is included), wiping off any that comes into contact with the tiles immediately. Allow 30 mins or longer for Grout Seal to be absorbed. Apply a second thin coat if necessary. Wipe off any excess with a damp cloth.
The kit contains enough to treat up to 300 linear metres of grout.
Although the actual coverage will depend on the width and porousity of the grout.
The kit comprises:
1 litre Grout Joint Cleaner
1 litre Grout Seal
2 small hydro sponges
1 Black Builder's Bucket (10 litre)
Total price if bought seperately: £23.94
Please note: Due to restrictions on the carriage of chemical substances we can only deliver this product to mainland UK addresses.
