Shower Rescue Kit

Seal a tiled shower

Seal grout in tiled showers to help prevent mould growth and ensure a lon-lasting shine

This is the right kit for you if any of the below apply:

• You have a shower with tiled walls that has not been previously sealed
• Your shower tile grout is discoloured or showing signs of mould

What you need to do:

1. Remove old silicone from the wall/shower joint and from anywhere else where the silicone is loose, leaking or discoloured.
2. Thoroughly clean the tiles with all surfaces are completely dry.
3. The tiles should now be ready for sealing. Use along the grout lines, then clean off residue.
4. When Shower Seal has dried, apply silicone to joints.

The kit contains enough to treat a standard shower or approximately 7 square metres

Although the actual coverage will depend on the particular shower and the width and porousity of the grout.

The kit comprises:

1 Litre Power Clean

1 Can Shower Seal

1 Cartridge of Silicone Sealer (choice of colours)

1 Gun for Silicone Sealer cartridge

1 Cleaning pad handle

1 Fine grade scrubbing pad (fits cleaning pad handle)

1 Economy sponge

1 Black Builder's Bucket (10 litre)

Please note: Due to restrictions on the carriage of chemical substances we can only deliver this product to mainland UK addresses.