Multi Clean 1 Litre

Ideal for frequent tile cleaning

For more help, check our selector chart, guide to tile types and product FAQ to help select the best products for your tiles.

General

Multi clean is an economical and hygienic cleaner for frequent tile cleaning.

Multi clean is easy and safe to use and is streak free. Multi clean contains no harmful chemicals and is bio-degradable.

Multi clean will not attack or break down sealers or polishers.

Multi clean may be used on any tile and hard surface including sealed surface.

Multi clean has a pleasant fragrance and is extremely economical to use due to the dilution ratio.

Useage

To be used as a daily cleaning regime, both domestically and commercially, such as in restaurants, hospitals, kitchens, and office blocks. May be used on other hard surfaces as a cost effective streak free cleaner.

May be diluted and applied by spray for glass and mirror cleaning. May be used on motor vehicles and other paint sprayed surfaces.

Application

Ensure that the shower walls and floors are clean before applying Shower Sealer. Ensure that the shower area is completely dry before sealing. Wait at least 24 hours after cleaning before sealing.

Ensure that the sealer is sprayed into the grout lines horizontally and vertically and onto the floor grout. Try to direct the spray along the grout lines only.

Repeat until the grouting is totally saturated. Wipe the excess off with a dry cloth and buff the tiles until they are streak free.

Do not use the shower for 24 hours after sealing.

The treatment can last for up to 2 years. However, we advise re-application whenever grout darkens when wet.

Directions

Dilute as per table below.

Apply the mixed solution to the area using a mop, sponge, or soft broom.

Mop as necessary.

Allow to dry.

Please note: Due to restrictions on the carriage of chemical substances we can only deliver this product to mainland UK addresses.