General
Bitumen Stripper is a specially designed solvent stripper for removing bitumen and glue from floors,
normally used after vinyl or carpet tiles have been lifted from a floor. Bitumen Stripper may also be used under controlled conditions for removing tar
stains.
Useage
Bitumen Stripper is water soluble. Always test on an inconspicuous area first.
Wear protective gloves and clothing. Take
care not to apply to surfaces that need to be protected. Do not allow contact with skin, eyes, nose or mouth.
| Task | Dilution | Coverage/Litre (square m) |
|---|
| Bitumen stripping | Neat | 5 -
10 |
| Glue stripping | Neat | 5 - 10 |
After testing apply the solution to a workable area. Allow 3
- 5 minutes for the solution to break down the dirt. Do not allow the solution to dry out.
Using a paint scraper, remove as much paint or glue as
possible. If there is any residue then repeat steps 1 and 2.
Scrub as necessary in order to remove any residues and add fresh clean water while
continuing to scrub. Mop up and rinse.
Inspect after allowing surface to dry. Repeat if necessary.
It is recommended that after stripping the
floor be cleaned with Genesis Power Clean and rinsed thoroughly.
Please note: Due to restrictions on the carriage of chemical substances we can
only deliver this product to mainland UK addresses.
Quantity 1
ALL PRICES INCLUDE VAT
